Q-switched diode-pumped solid-state, flare nx
Q-switched diode-pumped solid-state, flare nx


The FLARE NX is the next generation of passively Q-switched diode-pumped solid-state (DPSS) lasers designed to serve the life sciences, instrumentation, and scientific markets.

Short-Pulsed Diode-Pumped Solid-State Lasers

The FLARE NX is the next generation of passively Q-switched diodepumped solid-state (DPSS) lasers designed to serve demanding applications in the life sciences and instrumentation markets.

Available in wavelengths from IR to UV, the FLARE NX offers short pulse durations of ~1 ns. The FLARE NX also offers high repetitionrates up to 2 kHz, and pulse energies up to 500 µJ. The solid-state technology ensures long lifetimes, increasing quality and throughput.

The compact and rugged packaging of the FLARE NX laser head, coupled with digital driver concept, enables direct integration in OEM designs.

The superior performance, proven reliability and ruggedness, combined with ease of operation, make the FLARE NX a high-performing, cost-effective solution.



• Life Sciences
• Laser Microdissection
• Flat Panel Repair
• Laser-Induced Breakdown Spectroscopy (LIBS)

Features & Benefits

  • Available wavelengths:1030 nm, 515 nm, 343 nm
  • High pulse energy up to: 500 µJ at 1030 nm, 300 µJ at 515 nm, 100 µJ at 343 nm
  • Short pulses ~ 1 ns range
  • Pulse on demand, repetition rates from single-shot up to 2 kHz
  • Excellent beam quality: TEM00/M2 <1.2
  • Superior reliability and ruggedness
  • Long life time OEM design

FLARE NX 1030-1.0-2
FLARE NX 515-0.6-2
FLARE NX 343-0.2-2
Wavelength (nm)
Pulse energy1 (µJ)
Pulse Energy Variation ptp (%)
Pulse Repetition Rate (Hz)
up to 2000
Pulse Width (ns)
Spatial Mode
TEM00,M2 <1.2
Beam Waist Diameter at 1/e2 (µm) 490±35 360± 390±30
Beam Waist Location2 (mm) 140±15 200±30 190±30
Beam Symmetry (%)
Static Alignment Tolerances
Beam Position (mm)
Beam Angle (mrad)
>100:1, vertical±5
Warm-up Time to Stand By (s)
Base Plate Operating Temperature
15 to 35°C (59 to 95°F)
Ambient Temperature
15 to 45°C (59 to 113°F)
-20 to +50°C (-4 to 122°F)
Laser Head Heat Dissipation 3 (W)
Relative Humidity (%)(non-condensing)
Dimensions (L x W x H)
Laser Head
155.6 x 93.5 x 38.25 (6.13 x 3.68 x 1.5 in.)
160 x 130 x 45 mm (6.3 x 5.12 x 1.77 in.)
Laser Head
~1.25 kg (2.75 lbs.)
160 x 130 x 45 mm (6.3 x 5.12 x 1.77 in.)
Controller Cable Length
1 m (3.28 ft.)
Operational Voltage4 (VDC)
Laser Control Electronics (W)
Digital, OEM4
Mode of Operation
Gating (5V TTL high)
Communication Interface

1 Pulse energy at 2000 Hz maximum decrease over warranty period <10%

2The beam waist location is inside the laser head. Reference surface is the output window.

3 Baseplate temperature 30°C

4 Power supply not included, PC required

Product Downloads